Ultra-Drain Seal Standard Model

The Ultra-Drain Seal is made with urethane and will degrade/break down in extended UV exposure.  It is recommended that drain seals only be exposed for as long as required to contain and clean-up a spill.  Long-term outdoor use is not recommended.

It is not recommended that the Ultra-Drain Seal be driven over under any circumstances.  The softer nature of the material can be damaged under vehicle tires and other equipment.

Typically, a standard soap and water mixture is all that is needed to clean the Ultra-Drain Seal.  Once it has been cleaned it should be allowed to air dry and then returned to its original packaging.

Yes, the Ultra-Drain Seal is reusable provided that it has not been exposed to a chemical that has caused any degradation.

The Ultra-Drain Seal has reinforced tear-resistant mesh “sandwiched” between layers of urethane, cutting it is NOT recommended as it may cause the unit to delaminate.

Yes. Contact our Sales Team for more information

For best results, use an Ultra-Drain Seal that is at least 152 mm larger than the outside of the grate.

The Ultra-Drain Seal should be stored in a cool, dry area in the box that it is shipped in. Optional hard-plastic carrying cases that can be wall mounted or truck mounted are also available.  It is important that the Ultra-Drain Seal does not touch itself because, over time, the touching areas will fuse together.  This can be prevented by using the cardboard tube and plastic sheeting each unit is shipped in.

Chemical compatibility guides are based on a one-year immersion test. However, spill response products are not exposed to chemicals for such a long duration. Therefore, the Ultra-Drain Seal might still be effective against a chemical that’s labeled as ‘NR’. To determine efficacy, please contact our customer service team for a no-charge sample.